Shenzhen Nanshan office furniture company experts remind you: solid wood furniture Generally divided into pure solid wood furniture And imitation solid wood furniture two, pure solid wood furniture, wood in positive and negative can see the corresponding grain or scarring. With the more common solid wood furniture on the market for beech, oak wood, elm wood, rubber wood. The high-grade solid wood furniture made of wood is relatively rare, the cost is relatively expensive, like rosewood, rosewood, wings of wood is good wood timber. On the market this year launched a new solid wood furniture brand "Zijin Luxuries", with rare purple wood for the material, caused the consumer panic buying craze.

Shenzhen Nanshan office furniture company experts teach you the selection of 12 points to note:

1, open the cupboard door, drawer of furniture, wood should close texture, grain clarity. If the choice is relatively poor raw material, beautiful furniture very much worse.

2, with his nose close to the furniture smell, solid wood furniture should be no irritant smell. If there is a bad smell, the wood quality is poor, or mildew.

3, hand shaking table, chairs and other furniture, have a look whether the frame structure is easy to loose, drawers and doors are inclined. For example, Zijin Luxuries such high-end solid wood furniture, the workmanship is very fine.

4, check the parts are too tenon eye position is askew, eye is too large or tenon not strict etc..

5, check whether there is leakage less pieces, nail, nail penetrating phenomenon.

6, a large furniture should be in the foot, backplane, drawers and other local fixed screw.

7, furniture products are mainly affected by whether there is a large scar and crack positions such as the seat of the chair surface.

8, the surface of the furniture to be smooth, it and other parts should be careful no rough workmanship. The film wrinkle free skin, sticky, cracks, bubbles, problems such as leakage paint.

9, a furniture panel is pressed by hand, if there is no false or fibrillation dynamic, explain the structure is not firm.

10, jog furniture on foot or just sit in the furniture aside, detecting whether firm.

11, if wardrobe , shoe cabinet, will open 90 degrees forward and then gently pulling, if the cabinet automatically forward the stability is not enough.

12, a mirror and a dresser must install the back plate, glass to edge grinding processing and layering is fixed, so as to avoid unnecessary damage.

solid wood furniture To sum up, the two most important aspects. One is the solid wood material quality level, two is the technological level of furniture. The seemingly simple, actually to furniture manufacturers require very high