Stability depends on changes in the structure of solid wood furniture, moisture content , and will be affected by the ambient humidity , due to sales of the two air humidity difference is too large furniture easily lead to deformation and cracking. There is an old saying "solid wood but the Yangtze River" , that is, the production of solid wood furniture in the south to the north , the climate impact because of moisture , which tends to crack , deformation and other problems. In the production of solid wood furniture , soft and hard wood should be noted separately , if the frame , the door side of the mountain or material inconsistencies , due to the contraction of different , more easily deformed ratio.

One , solid wood furniture and maintenance

1, dust

Should always dust, dirt every day, because the surface friction of solid wood furniture .

Best to use a clean, soft cloth, such as an old white T-shirt with a cotton cloth or baby . Remember not to use a sponge or utensils clean utensils wipe your furniture . Please use the soaked cotton wrung when

dust, because wet cotton can reduce friction , avoid scratching the furniture , but also helps to reduce static cling to dust , which will help remove dust furniture surface. But should avoid moisture left in the surface of the furniture , the proposal should then wipe with a dry cloth .

When you rub ash furniture , you should move away your ornaments, and guarantee that move gently .

2, the cleaning

Order to remove the furniture surface from the air pollutants , smoke cooking time , the traces of the stain and polish residue when caused when operating , we recommend using a dedicated furniture cleaner. Such solvents may also help to remove excess wax.

Be erased together , nor any other adverse reactions.

3, waxing

Addition to regular dust , the wooden furniture is also sometimes rely on waxed surface for further maintenance to increase the aesthetic appearance . We recommend using a dedicated

pure wood furniture polish furniture periodic maintenance. Also, be sure not to vote for those who polishes contain silicone , since silicone will not only soften thereby undermining the coating will clog the pores of the wood , to repair difficult.

Although often wax coating does not hurt , but we recommend that you polish a year only 1-2 times. Excessive waxing will damage the coating appearance.

We recommend polishing procedures are as follows :

(1) to polish painted on a clean soft white cloth , preferably cotton and other natural fibers. Please economical use polishing wax , because only a small amount of furniture polish can be maintained for a longer time so beautiful .

(2) along the direction of the wood grain will polish rubbed onto the furniture. With the other side with a soft cloth , if necessary, you can wipe the excess polish furniture surface with another piece of soft cloth.

(3) waxing process to avoid excessive friction. Excessive friction is actually harmful to the matte layer will lead to serious uneven surface gloss furniture .

4, water marks

Water marks usually over a period of time to disappear. If after a month it is still visible, coated with a small amount of salad oil or mayonnaise clean, soft cloth to wipe the water marks in place along the grain direction . Cover with a damp cloth or printed on the mark , then carefully pressed several times with a damp cloth irons, printed marks to fade

5, burn marks :

With a dry , ultra-fine steel wool pad furniture painting special place in burn marks along the direction of the wood grain directly wipe ; may also be coated with a mayonnaise salad or hot mark office, take a soft cloth to smooth wood gently wipe patterns , and then back to a clean, soft cloth to wipe clean. Finally glazing . Or cigarette butts out of the match to leave scorch marks on furniture paint , if the paint burning, wrapped in a layer of fine lines can be hard cloth on matchstick or toothpick , gently wipe marks , and then coated with a thin layer of wax, scorch to fade .

6, burn marks :

Extinguished cigarette butts or matches left scorch marks on furniture paint , if the paint burning, hard cloth may be wrapped in a layer of fine lines on matchstick or toothpick , gently wipe marks , and then coated with a thin layer of wax , scorch marks to fade .

7, scratched :

If furniture paint scratches , paint untouched under the wood, furniture available with the same color crayons or paint furniture painting wound to cover the exposed background , and then coated with a thin transparent layer of nail polish can

8, metal decorative pieces :

Just gently wipe with a dry cloth , do not use detergents containing chemical substances.

9, glue the paper :

The paper completely soaked with salad , grain direction by gently rubbing with steel wool furniture dedicated a few minutes. After the polish dry .

Easily lead to cracking in winter drying baking wooden furniture and maintenance the way

Maintenance of mahogany furniture

Winter rattan furniture and maintenance methods

Care and maintenance of wooden furniture

Wooden furniture, cleaning, maintenance

Don't forget to furniture "water in winter"

White office furniture maintenance tips

The six cardinal principles furniture maintenance

Characteristics and maintenance of veneer furniture

Winter dry how to maintenance of furniture