1, see the

office furniture do fine is not fine, can from a combination of parts to observe, look at the connection point between the furniture of each component is reasonable and firmness. If a piece of furniture is a combined type, its hardware connections should be high quality, sealing degree hardware itself determines the overall fitness of furniture. The overall structure of the furniture, each connection point, including the connection point between the horizontal, vertical must be closed, there can be no gap, not loose. Drawers and doors should be flexible opening and closing, return the correct. Glass door periphery should be polished clean, flexible opening and closing, no collapsing ballast, scratches, four angle symmetry, hand clasping position correct. Various Cypriot Kok, the pressure of the column, slide installation should be correct position, realistically solid, open flexible.

2, look at the

due to the decoration of furniture making and other woodworking color, texture, pattern matching harmony, therefore, decorative materials, paint process, they are basically the same. Quality and windows check decoration furniture appearance appearance quality is similar to the outside. The main is to see film on the surface is smooth and bright, no flow fall, bubbles, wrinkles and other defects; also see color decorative panel is large, the pattern is consistent, there is no corrosion spots, dead, broken; all kinds of man-made board components Fengbian tight flattened, whether with or without degumming, the surface is smooth and flat there is no bump.

3, look at the structure of

check the structure of office furniture is reasonable, whether the frame upright, firmly. Gently push the furniture, if there is a shaking or creaked, explain the structure is not firm. To check the verticality of furniture: when the plane diagonal length greater than 1 meters, the vertical error should be less than 1, 5 mm; less than 1 meters, the error should be below 1 mm. Also check the warpage: when the plane diagonal length of more than 1, 4 meters, the warp degree should be less than 2 mm, while the diagonal length is less than 0, 7 meters, the warp degree should be less than 0.5 mm.

4, look at the size of

furniture not only beautiful, more important is the practical. The size of the furniture is in accordance with the principle of human body engineering, are in accordance with the provisions of the size, determines the furniture is easy to use and not.